Product Introduction
Product Pictures
Product Features
1. More convenient control
Rigid off-road chassis, four-wheel hydraulic drive, two-wheel hydraulic steering, with better controllability.
Open cab, 180° rotating driving position, convenient and flexible, and can be driven in both directions.
Add a self-priming pump for quick-setting agent to facilitate the addition of quick-setting agent.
2. More reliable performance
The hopper vibrator is changed from hydraulic power to 24V low-voltage DC electric power, and the air cooler is also changed to AC380V electric drive, with lower failure rate, longer life and more stable performance.
The quick-setting agent container is changed to a more wear-resistant and corrosion-resistant translucent plastic barrel, which is also convenient for observing the liquid level.
3. The design load distribution is reasonable and has a greater anti-overturning moment.
4. The fully hydraulic telescopic and rotating mechanical arm has strong load-bearing capacity, stable movement, flexible operation, and no construction blind spots.
5. The long-stroke and large-diameter conveying cylinder is used to reduce the wear of the wear-resistant ring and the wear-resistant plate, while improving the stability of concrete spraying.
6. The plateau model can be customized to meet the construction requirements of 5000m above sea level.
7. According to the preset ratio, the dosage of the admixture is automatically consistent with the concrete output, and the corresponding changes are automatically made when the concrete output changes, so that the admixture always maintains the preset ratio with the concrete output. And it can be monitored and adjusted in real time through the touch screen or remote control.
8. In the absence of power, the power of the diesel engine can be used to make the injection manipulator move at a slower speed, so that the purpose of retracting and releasing the manipulator and clearing the concrete pump can be achieved in the absence of power, avoiding the danger of the machine being unable to move and delaying the clearing of the concrete pump when the working surface encounters a sudden power outage, causing the danger of solidification and freezing.