XMPYT-55/450(J)

Scaling rig

It is a special equipment for prying and clearing small and medium-sized tunnels. It is mainly suitable for prying operations in metal mines and various underground engineering tunnels, tunnels, and tunnels. It can quickly and effectively remove the broken and unstable floating stones on the top plate and both sides of the working face after blasting operations to ensure the safety of personnel and equipment on the operation site. The equipment is easy and flexible to operate, safe and reliable, simple to maintain, and low in cost.

Impact energy：≥450J
Engine power：55kW
Drill rod diameter：45mm

Product Introduction

Product Pictures

Product Features

1. The hydraulic torque converter and gearbox drive the engineering chassis, four-wheel drive, large driving torque, high bulldozing capacity, and strong climbing performance.

2. The cab meets the mine safety ergonomic design, centralized control, reasonable layout, comfortable and convenient.

3. The domestic Yunnei 55kW National III engine is adopted, with a high market share and low equipment maintenance costs.

4. The thickened high-strength steel boom is adopted, with strong load-bearing capacity and small boom shaking during work.

5. The articulated special chassis has a smaller turning radius, which can meet the needs of shaft and tunnel operations to the greatest extent.

Equipment View

Equipment Parameters

Project		Unit	Parameter value
Machine parameters	Overall dimensions (length x width x height)	mm	6100×1910×2200
	Minimum turning radius	mm	Inside: ≤3510 Outside: ≤5600
	Minimum ground clearance	mm	200
	Maximum working height	mm	6000
	Weight	kg	5000
Hydraulic breaker	Impact energy	J	≥450
	Impact frequency	Hz	11～20
	Drill rod diameter	mm	45
	Weight	kg	80
	Workflow	L/min	20～40
	Hydraulic hammer swing angle (optional)	°	90
	Work pressure	MPa	≤12
Powertrain	Drive and steering type	—	Four-wheel drive, articulated steering
	Walking speed	km/h	16.5km/h
	Turning angle	°	27
	Fuel tank capacity	L	55
	Gradeability	°	twenty two
	Service brake	—	Hydraulically actuated dual circuit oil immersed multi-disc brake
	Parking brake	—	Spring applied, hydraulically released, fail-safe brake
	Diesel engine rated power	kW	55
	Rated speed of diesel engine	rpm	2400
Working arm	Work pressure	MPa	14
Working arm	Set pressure	MPa	15.5

Due to different customer needs, parameter settings may vary. Our company reserves the final right of interpretation for the above content. If you need the latest information or product customization, please contact customer service: Questions and Quotes

Product Inquiry

Please fill in the detailed demand information and a professional service staff will respond to you in time.

Products