Mining drawpoint drilling & blasting  jumbo
CYTC41Q(A)

Mining drawpoint drilling & blasting jumbo

CYTC41Q(A) Mining Drawpoint Drilling & Blasting Jumbo is a fully mechanized drill and blast jumbo integrating drilling and explosive charging. It is suitable for secondary breaking in drawpoints, tunnels, and stopes of metal mines, non-metal mines, hydropower projects (non-explosive environments), and can clear drawpoint blockages and break boulders. The rock drill is a pneumatic type, offering higher cost-effectiveness.
  • Impact energy:44J
  • Drilling depth:1m
  • Drilling diameter:41mm

Product Introduction

Product Pictures

Product Features

1.Integrating multiple functions such as drilling and explosive charging.Drilling performed with a pneumatic rock drill (hydraulic rock drill optional), with low cost, suitable for occasions where the number of holes to be drilled is small.

2.Articulated steering, flexible turning during travel, suitable for narrow tunnels in underground mines.

3.Full diesel power, torque converter four-wheel drive engineering chassis, self-contained power and water tank.Self-contained air compressor, no need for external power, water, or air connections.

4.Hydraulic wet dual brake system, service brake oil-applied, parking brake closed spring brake, safe and reliable.

5.Equipped with a bamboo pole gripper, which can deliver bamboo poles with explosives tied at the ends into the ore pass or into gaps between large boulders at higher drawpoint positions.

6.Drilling, charging, and blasting , achieving internal blasting effects far superior to the currently common surface blasting effects.

7.Remote control system (optional), which can perform drilling, charging, and other operations via remote control, safe and reliable.

Equipment View

Equipment Parameters

Item

Parameter

Overall Performance

Transport Dimensions(L × W × H)

8800×1820×2250mm

Overall Weight

5400kg

Drilling Diameter

Φ41mm

Drilling Depth

1000mm(other depths customizable)

Driving System

Ground Clearance(Central Pin)

220mm

Min. Turning Radius

Inner:3600mm;Outer:5400mm

Max. Gradeability

14°

Rear Axle Swing Angle

±6.5~±8.5°

Max. Drivig Speed

9.5km/h

Tires

Mining solid tires

Air-leg Drill

Impact Energy

44J

Drill Boom Mechanism

Telescopic Length

513mm

Dynamic System

Power Mode

Diesel engine for travel and operation

Engine Rated Power & Speed

Yunnei 81kW/2400rpm

Water Supply Device

Water Tank Capacity

250L

Air Supply Device

Rated Pressure

0.8MPa

Displacement

4m³/min

Powder Feeding Gripper

Number

2

Small Clamp Girp

Movement Range

36~44mm

 Single Clamping Weight

 <2kg

Bamboo Pole Gripper(Optional)

Holding Pole Diameter

Φ30~Φ80mm

Gripper Rotation Angle

360°

Gripper Pitch Angle

0~90°

Feeding Height

6m

Feeding Weight

12kg

Other

Automatic Fire Extinguishing System

Optional

 

Due to different customer needs, parameter settings may vary. Our company reserves the final right of interpretation for the above content. If you need the latest information or product customization, please contact customer service: Questions and Quotes

Product Inquiry

Please fill in the detailed demand information and a professional service staff will respond to you in time.

Email
Phone
Phone0086-400-878-8080